LIN Errors

WaveBPS for FlexRay, CAN bus, and LIN bus

Navigation Live Capture Cursors Importing Exporting Decoder Setup Analysis Automated Test Specifications

Static Frame Dynamic Frame Wakeup Startup Physical Layer Compare To CAN and LIN

Data Frame Extended Frame Remote Frame CAN Bus Errors Bit Stuffing Physical Layers Single Wire CAN Compare To FlexRay and LIN

LIN Frame LIN Header LIN Slave Part LIN Errors Compare to CAN and FlexRay

UART: K-Line, J1708, RS232 J1850 SPI I2C

LIN Errors

There are many possible errors in the LIN protocol. Some of them include: 1) the frame taking too long, 2) a checksum error, 3) sync problems, and 4) LIN ID parity. Also, unlike CAN and FlexRay, the LIN protocol is almost always written as a software driver. Therefore, application issues, such as disabling interrupts, can cause intermittent timing errors.

LIN Checksum Error

Here a LIN Checksum error indicates that something is not correct in the data section.

Policy - WaveBPS is a trademark of Intrepid Control Systems, Inc.