LIN Slave

WaveBPS for FlexRay, CAN bus, and LIN bus

Navigation Live Capture Cursors Importing Exporting Decoder Setup Analysis Automated Test Specifications

Static Frame Dynamic Frame Wakeup Startup Physical Layer Compare To CAN and LIN

Data Frame Extended Frame Remote Frame CAN Bus Errors Bit Stuffing Physical Layers Single Wire CAN Compare To FlexRay and LIN

LIN Frame LIN Header LIN Slave Part LIN Errors Compare to CAN and FlexRay

UART: K-Line, J1708, RS232 J1850 SPI I2C

LIN Slave Section

The LIN Slave section includes the data of the LIN frame followed by the checksum. The slave section follows the LIN Header part of the LIN Frame.

LIN Data Section

The LIN Data section includes up to 8 data bytes

After the data section is the checksum. The checksum will vary based on the LIN specification. LIN supports both a classic and enhanced checksum. The classic checksum uses all the databytes while the enhanced also includes the ID.

LIN Checksum

The LIN Checksum is the last part of the LIN frame.

Policy - WaveBPS is a trademark of Intrepid Control Systems, Inc.